Lycra and Mesh Shirts, Pants and Shorts Instructions: 

Follow the steps below to ensure long-lasting wear and care:

1. Pull the fabric back on the armor pockets to remove the armor. (Note: failure to remove armor may cause damage to the fabric shell.)
2. Wash fabric shells on a low-temperature setting and gentle cycle or hand wash. Do not dry clean!
   White Summer Mesh shirts must be washed with white clothes only or by hand. Discoloration due to washing with colored garments, leaving sunscreen on the garment too long or stains are not warrantied. 
3. We recommend using an activewear detergent when laundering your garments to maintain the integrity of the stretch in the fabric.
4. Do not wash Bohn fabric shells with items that have Velcro®, hooks or accessories that could catch and snag the fabric or with garments that have not been washed before. 
5. Dry shells at a low temperature or best to just hang them dry.
6. We recommend removing the armor from your Bohn gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and could negatively affect the armor.
7. Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled.  
8. When dry, reinsert the armor pieces into their respective pockets and pull the pocket flaps into place. This ensures the armor will stay in the proper position.

Please NOTE:

• Our garments are made with Lycra® and must be washed regularly. Salt air and sweat left on the garment can break down the Lycra® in the garment so it is imperative that they be washed regularly and not stored for long periods of time with salt or sweat on them.
• Also, pilling can occur if the garment is consistently rubbing against something that agitates the garment (i.e., tag, plastic, loose seam, etc.), so please be certain you do not have an overgarment that could agitate the fabric. If you start seeing pilling, turn your jeans, pants, or jacket inside out and feel for the item that is rubbing on your garment.

**Lack of care, pilling of garments, rips, tears, or lingering smells are not covered under our warranty.

With proper care, our garments can last years. We wish you many years of riding protection!

---

Armor Care Instructions:

Cleaning:

We recommend removing the armor from your Bohn gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and negatively affect the armor.
Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled. 

Recommended Temperature:

We recommend storing your protectors in temperatures above 55 degrees. Cold or hot temperatures will not affect the effectiveness of the protector, but extreme cold in addition to stress on the protector (ie. bending of the armor) can cause the pieces to crack. Please keep your protection inside your home and do not put your pants or shirts on when they have been sitting in temperatures below 50 degrees. They should be warmed first. Protectors can be worn on a cold ride as your body warmth should keep the protectors at a comfortable temperature. If you would like protectors specifically made for cold temperatures, please give us a call we have options. 

As such, do not stress the protectors in extremely cold weather conditions. For example, leaving pieces in a cold garage and then putting them on can cause armor with articulation to crack at the articulation points. 

Just use good judgment when wearing the protectors and try your best to keep them against your warm body or stored in temperatures above 50-60 degrees for the longest life. DO NOT use frozen protectors–bring them inside to warm up before you use them.

Warranty:

Limb armor, like your helmet, has an expiration date typically 5-10 years from manufacture. Cracking of the armor pieces is not warrantied as this means one of two things:

1. The armor placement is incorrect on your body (see the proper placement graphic below) and stressed over and over at an articulation point.  
   or
2. It has been subjected to cold temperatures and then bent or used while frozen or cold. This is virtually the ONLY way the protector can/will crack unless you took scissors or a knife and cut it. If your protector is affected and you are 100% confident that you have taken care of your protector, please give us a call. If you need to replace your armor, you can find all of our armor here>>