Kevlar Riding Sweatshirt-Grey

This soft cotton kevlar sweatshirt is the perfect addition to your riding wardrobe. Stylish and comfortable for on or off the bike.

• Universal armor pockets hold Bohn’s highest-rated CE-Level 2 Armor for the shoulders, arms and back
• Kevlar-lined for extra slide protection and a little extra wind protection
• Heavy-duty durable construction
• Full-zip up the front 
• Hood 
• Two inside conceal carry pockets or just deep pockets for keys, phone etc.
• One inside zip pocket
• Two outside pockets
• Optional Armor – Measurements:
   – 2 Shoulder Sections (5 in wide x 8 in long for XS-2XL OR 6 in wide x 9 in long for 3XL+) Weight – 2.5oz each
   – 2 Arm/Elbow Sections (5 in wide x 12 in long for XS-2XL) Weight – 3.5oz each
   – 1 Back Armor 12.5 in wide x 16.75 in long, Weight – 11oz

This sweatshirt fits any Bohn armor you have.

Our pocket design enables you to easily remove the armor and wash your fabric shells for years of use.

Follow the steps below to ensure long-lasting wear and care. 

1. Pull the fabric back on the armor pockets to remove the armor. (Note: failure to remove armor may cause damage to the fabric shell.) Be sure to take care when removing due to the velcro fabric closures.
2. For best results, we strongly recommend the fabric shell be dry cleaned (Please speak with your dry cleaner to make sure they can properly care for your garment due to the Kevlar lining). The fabric shell can also be handwashed in cold water, using a mild detergent.
3. Spot clean as needed.
4. Hang dry.
5. Iron on low.

Please NOTE:

• Pilling can occur if the garment is consistently rubbing against something that agitates the garment (ie. tag, plastic, loose seam, etc.), so please be certain you do not have anything that will agitate the fabric. 

**Improper care (ie. lack of laundering), pilling and shrinking of garments is not warrantied. 

With proper care, our garments can last years. We wish you many years of riding protection!

Cleaning:
We recommend removing the armor from your Bohn gear from time to time to clean it as detergent residue, salt (including body salt) and moisture can stick to it and negatively affect the armor.

Armor pieces should NOT be placed in the washing machine or dryer, but may be wiped clean with a damp cloth if they become soiled.

Temperature:
We recommend storing your protectors in temperatures above 60 degrees. Extreme temperatures will not affect the effectiveness of the protector, but extreme cold in addition to stress on the protector (ie. bending of the armor when cold) can cause the pieces to crack.

A such, do not stress the protectors in extremely cold weather conditions. (For example, leaving pieces in a cold garage and then putting them on can cause armor with articulation to crack at the articulation points.)

Just use good judgment when wearing the protectors and try your best to keep them against your warm body. DO NOT use frozen protectors–bring them inside to warm up and then use.

Warranty:
Limb armor, like your helmet, has an expiration date typically 5-10 years from manufacture.

If you have Bohn armor that is 5-10 years old and is "crumbling", you need to replace it. If only one piece is crumbling, the other pieces are sure to follow. This means your armor has expired and all pieces should be replaced as they were likely manufactured at the same time.

Cracking of Level 2 armor pieces is not warrantied as this means one of two things:

• The armor placement is incorrect on your body (see proper placement graphic below).
  OR
• It has been subjected to cold extreme temperatures and then bent or used while frozen or cold.

If your protector is affected and you are confident that you have taken care of your protector, please give us a call.